Nor Service Rotary Combination

Tooling:
    *Burring  *Turning    *Beading
    *Stretching    *Crimp    *Offset
    *O.G. Bead    *60" "V"
*Bead and Crimp
Specialized Rolls manufactured to meet your production needs
Available with either Hand Wheel or Air Cylinder. The Air Cylinder model frees both hands for easier, faster manipulation of work operations

This machine works in heavier sheets and has a capacity of 16-gauge mild steel

505P
  Rotary Combination Machine/Power
       1'8" wide, 2'10" long, 4'11" high

505H
  Rotary Combination Machine/Hand
       1'8" wide, 2'10" long, 4'6" high

Capacity, max -------------------------
Throat Depth --------------------------
Forming Speed Standard -----------
Optional -----------
Distance Between Shaft Centers
Diameter of Roll Shafts ------------
Air Supply ------------------------------
Motor ------------------------------------

16-gauge mild steel
5"
35 FPM
70 FPM
3"
1 1/4"
90 PSI
3/4 HP, 220/440 Volt, 1725 RPM, 60 Cycle, 3 Phase
size 00 magnetic starter and fused disconnect switch

The 512 Series adapts
to special uses such as

Cutting out Barrel Heads
Beading & Flanging of stool rims
Operation on Floodlight Rims

Tank Heads

As with all of our
Rotary Combination Machines
the 512 is built with a cast iron head - machine-cut steel gears totally enclosed - ground & polished steel shafts

-512 Models-

No. 512P
Rotary Combination - Power Clamp

No. 512H
Rotary Combination - Hand Clamp
Nor Service

To receive a quote or more info
on our 512

512P --- 2'3" wide, 3'4" long, 5'6" high
512H --- 2'3" wide, 3'4" long, 5'3" high

  Tooling:
    *Burring  *Turning    *Beading
    *Stretching    *Crimp    *Offset
    *O.G. Bead    *60" "V"    *Bead and Crimp

Capacity, max ----------------------------
Throat Depth -----------------------------
Forming Speed ---------------------------
Distance Between Shaft Centers ---
Diameter of Roll Shafts ---------------
Air Supply ---------------------------------
Motor ---------------------------------------

10-gauge mild steel
12"
24 FPM
4 1/4"
1 3/4"
90 PSI
2 HP, 220/440 Volt, 1725 RPM, 60 Cycle, 3 Phase
size 0 magnetic starter and fused disconnect switch

The forming rolls listed below are used on

No. 505

No. 512

No. 520
Rotary Combination Machines

	D-20-15 T/B Burring	D-20-17 T/B Turring	D-20-16 T/B Bead	D-20-20 T/B Stretching	D-20-19 T/B Crimp	D-20-24 T/B Offset	D-20-23 T/B O.G. Bead	D-20-25 T/B *60 "V"**	4786-126 T/B Bead 4785-127 T/B Crimp

For other shapes not shown above, please contact our Engineering Department
at service@normaplewood.com / Phone: 815.232.8379
Fax: 815.232.4108

These machines will also make adjustable elbows in 24-gauge mild steel -sizes are-
4-piece 90* - 3" thru 12"
2-piece 45* - 6" thru 12"

3-piece 45* - 3", 4", 5"

No. 513H (hand) and the No. 513P (Air) have been designed and built for strength and rigidity

Equipped with adjustments for roll alignment for material thickness

Furnished with floor pedestal

Both models are Virtually 14 machines in one, accessories used on the No. 513H and 513P Rotary Combination Machine are interchangeable with the NOR Elbow Machines

513P
  Rotary Combination Machine
   Air cylinder to operate the tooling
     Floor Space-------3'4" x 1'6"

513H
  Rotary Combination Machine
   Hand lever to operate the tooling
     Floor Space-------3'4" x 1'6"

Capacity, max ---------------------------
Throat Depth ----------------------------
Forming Speed --------------------------
Distance Between Shaft Centers --
Diameter of Roll Shafts --------------
Air Supply ---No. 513P---------------
Motor --------------------------------------

24-gauge mild steel
13"
28 FPM
1 3/4"
7/8"
90 PSI
3/4 HP, 115/230 Volt, 1725 RPM, 60 Cycle, Single Phase
manual starter with overload protection

This site proudly developed and maintained in the USA

Online Privacy Policy