| 
Tooling:
*Burring *Turning *Beading
*Stretching *Crimp *Offset
*O.G. Bead *60" "V"
*Bead and Crimp
Specialized Rolls manufactured to meet your production needs Available with either Hand Wheel or Air Cylinder. The Air Cylinder model frees both hands for easier, faster manipulation of work operations
This machine works in heavier sheets and has a capacity of 16-gauge mild steel | 
 | 
 | |
505P
Rotary Combination Machine/Power
1'8" wide, 2'10" long, 4'11" high
505H
Rotary Combination Machine/Hand
1'8" wide, 2'10" long, 4'6" high | Capacity, max -------------------------
Throat Depth --------------------------
Forming Speed Standard -----------
Optional -----------
Distance Between Shaft Centers
Diameter of Roll Shafts ------------
Air Supply ------------------------------
Motor ------------------------------------ | 16-gauge mild steel
5"
35 FPM
70 FPM
3"
90 PSI
3/4 HP, 220/440 Volt, 1725 RPM, 60 Cycle, 3 Phase
size 00 magnetic starter and fused disconnect switch |
|  |
| Capacity, max ----------------------------
Throat Depth -----------------------------
Forming Speed ---------------------------
Distance Between Shaft Centers ---
Diameter of Roll Shafts ---------------
Air Supply ---------------------------------
Motor --------------------------------------- | 10-gauge mild steel 12" 24 FPM 4 1/4" 1 3/4" 90 PSI 2 HP, 220/440 Volt, 1725 RPM, 60 Cycle, 3 Phase
size 0 magnetic starter and fused disconnect switch |
| D-20-15 T/B
Burring | D-20-17 T/B
Turring | D-20-16 T/B
Bead | D-20-20 T/B
Stretching | D-20-19 T/B
Crimp | D-20-24 T/B
Offset | D-20-23 T/B
O.G. Bead | D-20-25 T/B
60* "V" | 4786-126 T/B
Bead
4785-127 T/B
Crimp | | |  |  |  |  |  |  |  |  |  | |
For other shapes not shown above, please contact our Engineering Department
at
| 
These machines will also make adjustable elbows in 24-gauge mild steel -sizes are-
4-piece 90* - 3" thru 12" 2-piece 45* - 6" thru 12" 3-piece 45* - 3", 4", 5" | | 
No. 513H (hand) and the No. 513P (Air) have been designed and built for strength and rigidity
Equipped with adjustments for roll alignment for material thickness
Furnished with floor pedestal
Both models are Virtually 14 machines in one, accessories used on the No. 513H and 513P Rotary Combination Machine are interchangeable with the NOR Elbow Machines
| |
513P
Rotary Combination Machine
Air cylinder to operate the tooling
Floor Space-------3'4" x 1'6"
513H
Rotary Combination Machine
Hand lever to operate the tooling
Floor Space-------3'4" x 1'6"
 | Capacity, max ---------------------------
Throat Depth ----------------------------
Forming Speed --------------------------
Distance Between Shaft Centers --
Diameter of Roll Shafts --------------
Air Supply ---No. 513P---------------
Motor -------------------------------------- | 24-gauge mild steel
13"
28 FPM
1 3/4"
1"
90 PSI
3/4 HP, 115/230 Volt, 1725 RPM, 60 Cycle, Single Phase
manual starter with overload protection |
 service@normaplewood.com / Phone: 815.232.8379
Fax: 815.232.4108
|
*
