|
|
 |
 |
     Step by step, NOR Service offers you machines that roll, crimp and punch elbow tubes that turn out adjustable elbows Purchase one, two or all three machines depending on what your needs are to streamline your elbow production |
    |
 |
 |
 Sheets of any length can be multiple-punched upto ten holes in 24 gauge mild steel Rivet holes are punched 3/8" from sheet edge to center of 9/64" holes with 5/8" spacing from center to center Stripper and die are constructed in one piece that provides quick and easy adjustment for varied rivet spacing |
  |
NOR Service has two different models of the Gang Punch the PGP (power) AGP (air) APG is an air-Operated Machine PGP has a low RPM motor - both models can punch up to 24 gauge mild steel |
 * |
 |
| AGP Air-Operated Gang Punch PGP Power-Operated Gang Punch Floor Space 3'5" x 4'2" |
Capacity, max ---------------------------- Blank Width, max ---------------------- Number Holes Punches --------------- Hole Diameter --------------------------- Min. center to center hole spacing - Air Supply ---AGP only----------------- Motor ----------PGP only----------------- |
24-gauge mild steel 24" up to 10 holes 9/64" 5/8" 90 PSI 3/4 HP, 125 RPM, 60 Cycle, 3 Phase size 00 magnetic starter and fused disconnect switch |
|
|
  |
Nor Service offers a Tube and Crimp Roller which will roll, crimp and bead in one operation We offer two widths of this tube roller 24" wide and 36" wide The Tube Roller will roll 3" diameter and larger elbow tubes and tubes without locks up to 34" in length (without crimp) on the 36" Tube Roller and up to 22" in length (without crimp) on the 24" Tube Roller, in 24 gauge and lighter |
  |
| * |
|
| 24TCR 24" Tube and Crimp Roller Floor Space 00" x 00" 36TCR 36" Tube and Crimp Roller Floor Space 00" x 00" |
Blank Size with Crimp - 24TCR------- - 36TCR ------ Blank Size without Crimp - 24TCR-- - 36TCR -- Tube Diameter ------------------------------ Capacity, max ------------------------------- Surface Speed ------------------------------- Motor ------------------------------------------ |
up to 24" up to 36" up to 22" up to 34" 3" minimum 24-Gauge mild steel 90 FPM 3/4 HP, 110 Volt, 1725 RPM, 60 Cycle, Single Phase |
|
|
to roll without crimping or work on the other end of the roll and oval positions |
 |
Nor Service offers an Oval Tube and Crimp Roller which will roll, crimp and bead in one operation Accommodates 2 foot wide blanks for making 3" through 14" Round and 5" through 10" oval elbows Includes |
| * |
|
| NOR-24OTCR 24" Oval Tube and Crimp Roller Floor Space 00" x 00" |
Blank Size with Crimp ----------------- Blank Size without Crimp ------------- Tube Diameter ---------------------------- Capacity, max ------------------------------ Surface Feed ------------------------------- Air Supply --------------------------------- Top Roll Size ------------------------------ Optional ------------------------------------ Motor ---------------------------------------- |
up to 24" up to 22" 3" minimum 24-Gauge mild steel 50 FPM 90 PSI / 2 CFM 1-3/4" 3 Phase Motor and Control Package 1 HP, 110 Volt, 1725 RPM, 60 Cycle, Single Phase |
|
|
| Nor Service inc. Elbow Machines are available in both Hand (NOR-H) and Air (NOR-P) The Elbow Machine will produce up to 600 elbows in an 8 hour shift. The NOR-H Operated Machines can make elbows in less than a minute. Cut, bead and set down segments in one revolution of the tube. The NOR-P Air Operated Machine has air cylinders at each station to operate the upper roll shaft and free both hands for faster work levels |
  |
 This 6" 4 peace 90* elbow can easily be made with our Elbow Machine - either the hand operated machine or by the air operated machine |
| * |
|
| NOR-H Hand-Operated Elbow Machine NOR-P Air-Operated Elbow Machine |
Capacity, max ---------------------------- Range -------------------------------------- Forming Speed -------------------------- Shaft Diameter--------------------------- Air Supply ----30 Gauge --------------- ----24 Gauge -------------- Motor --------------------------------------- |
24-gauge mild steel 3" thru 36" allows 87 FPM 7/8" 50 PSI (3/8" line) 120 PSI (3/8" line) 1HP, 220/440 Volt, 1725 RPM, 60 Cycle, 3 Phase size 00 magnetic starter and fused disconnect switch |
|
|
Online Privacy Policy
|
Copyright © 1999~2004 |