|  
Step by step, NOR Service offers you machines that roll, crimp and punch elbow tubes that turn out adjustable elbows
Purchase one, two or all three machines depending on what your needs are to streamline your elbow production |  
  |
| 
Sheets of any length can be multiple-punched
upto ten holes in 24 gauge mild steel
Rivet holes are punched 3/8"
from sheet edge to center of 9/64"
holes with 5/8" spacing from center to center
Stripper and die are constructed
in one piece that provides quick and easy
adjustment for varied rivet spacing | | 
 |
All Air and Power Gang Punch Machines come complete with an ten (10) piece punch and die set
NOR Service has two different models of the Gang Punch the
PGP (power)
AGP (air)
APG is an air-Operated Machine
PGP has a low RPM motor - both models can punch up to 24 gauge mild steel |
AGP
Air-Operated Gang Punch
PGP
Power-Operated Gang Punch
Floor Space
3'5" x 4'2" | Capacity, max
Blank Width, max
Number Holes Punches
Hole Diameter
Min. center to center hole spacing -
Air Supply ---AGP only
Motor -------PGP only | 24-gauge mild steel
24"
up to 10 holes
9/64"
5/8"
90 PSI
3/4 HP, 125 RPM, 60 Cycle, 3 Phase
size 00 magnetic starter and fused disconnect switch |
|  |  |
| Nor Service offers a Tube and Crimp Roller which will roll, crimp and bead in one operation
We offer two widths of this tube roller 24" wide and 36" wide
The Tube Roller will roll 3" diameter and larger elbow tubes and tubes without locks up to 34" in length (without crimp) on the 36" Tube Roller and up to 22" in length (without crimp) on the 24" Tube Roller, in 24 gauge and lighter | | Profitable Operation -- three steps in one pass Portable -- light enough to be mounted in any area Powered -- with 110 volt motor Simple to Operate -- the optional bead can be removed at anytime; to roll without crimping or work on the other end of the roll Easy Adjustment -- knurled knob to set up for different blank sizes Direct Drive Motor & Gear Reducer -- no belt adjustments needed
  |
24TCR
24" Tube and Crimp Roller
Floor Space 00" x 00"
36TCR
36" Tube and Crimp Roller
Floor Space 00" x 00" | Blank Size with Crimp - 24TCR
- 36TCR
Blank Size without Crimp - 24TCR
- 36TCR
Tube Diameter
Capacity, max
Surface Speed
Motor | up to 24"
up to 36"
22"
34"
3" minimum
24-Gauge mild steel
90 FPM
3/4 HP, 110 Volt, 1725 RPM, 60 Cycle, Single Phase |
| | |
| Profitable Operation -- three steps in one pass Portable -- light enough to be mounted in any area Floor Stand Powered -- with 110 volt motor Simple to Operate -- the optional bead can be removed at anytime;
to roll without crimping or work on the other end of the roll Easy Adjustment -- knurled knob to set up for different blank sizes
and oval positions Direct Drive Motor & Gear Reducer -- no belt adjustments needed Powered infeed pinch rolls |  | Nor Service offers an Oval Tube and Crimp Roller which will roll, crimp and bead in one operation
Accommodates 2 foot wide blanks for making 3" through 14" Round and 5" through 10" oval elbows
Includes crimp rolls Adjustable timers for sizing of oval elbows |
NOR-24OTCR
24" Oval Tube and Crimp Roller
Floor Space
00" x 00" | Blank Size with Crimp
Blank Size without Crimp
Tube Diameter
Capacity, max
Surface Feed
Air Supply
Top Roll Size
Optional
Motor | up to 24"
up to 22"
3" minimum
24-Gauge mild steel
50 FPM
90 PSI / 2 CFM
1-3/4"
3 Phase Motor and Control Package
1 HP, 110 Volt, 1725 RPM, 60 Cycle, Single Phase |
NOR-H
Hand-Operated Elbow Machine
NOR-P
Air-Operated Elbow Machine | Capacity, max
Range
Forming Speed
Shaft Diameter
Air Supply ----30 Gauge
---24 Gauge
Motor | 24-gauge mild steel
3" thru 36" allows
87 FPM
1"
50 PSI (3/8" line)
120 PSI (3/8" line)
1HP, 220/440 Volt, 1725 RPM, 60 Cycle, 3 Phase
size 00 magnetic starter and fused disconnect switch |
|
*
